Fit for:
For 2007-2012 Nissan Altima 2.5L
For 2007-2012 Nissan Sentra 2.5L
SPECIFICATIONS:
Vehicle Compatibility
Rapid Refrigeration
Energy Saving
Sturdy Aluminum Structure
Fully Tested ＆ Easy Installation
Product Type: AC Compressor
Pulley: 6PK
Voltage: 12V
Refrigerant: R-12 OR R-134a
Interchange Part Number: 92600JA00A,471-5003,12570.6T1NEW,CO 10886C,0610236,67664
Average Weight: 6.8 kg
Average Size: 241416 cm
It is necessary to add appropriate amount of oil and refrigerant to the ac compressor before use.
INSTALLATION METHOD:
PACKAGE INCLUDES:
1 A/C COMPRESSOR W/ CLUTCH
NOTE:
Condenser: This changes the phase of the refrigerant from gas to liquid and expels heat removed from the Freon
Expansion valve (or orifice tube in some vehicles): This device is somewhat of a nozzle and functions to simultaneously drop the pressure of the refrigerant liquid, meter its flow, and atomize it
Evaporator: This transfers heat to the refrigerant from the air blown across it, cooling your car
Receiver-Dryer or Accumulator: This functions as a filter for the refrigerant/oil, removing moisture and other contaminants
Remove compressor, receiver drier or accumulator, orifice tube or expansion valve
Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet
Drain all the oil from the new compressor and dispose of according to local, state and federal laws. (NOTE: if your compressor has a drain plug, you will need to open it up and drain what oil is in there too.)
Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated
Install new receiver drier or accumulator and new orifice tube or expansion valve
Evacuate the A/C system for a minimum of one hour
After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system
Start engine with A/C controls on MAX AIR with door and windows open
Add the remaining charge of refrigerant as called for by the manufacture
